ETC Membrane (remove CO²) Model ETC2.5x8

ETC Membrane (remove CO²) Model ETC2.5x8

Products Description: ETC membrane is used to remove dissolved carbon dioxide in water. Product water carbon dioxide content can be decreased to 0.5ppm. Removal of carbon dioxide from water is a necessary process in many industries. Systems using RO and EDI technologies need to reduce carbon...
Send Inquiry
Chat Now
Product Introduction

Dongturbo Electric Company Ltd is one of the leading manufacturers and suppliers of etc membrane (remove co²) model etc2.5x8 in China. We warmly welcome you to buy high quality customized products at competitive price from our factory. Contact us for more cheap products.

 

Products

Description: ETC membrane is used to remove dissolved carbon dioxide in water. Product water carbon dioxide content can be decreased to 0.5ppm.

Removal of carbon dioxide from water is a necessary process in many industries. Systems using RO and EDI technologies need to reduce carbon dioxide content in water. Entering the high conductivity level of EDI will reduce the resistivity of outlet water. The common cause of high conductivity is dissolved carbon dioxide in water. Removal of carbon dioxide from water by degassing membrane without any PH adjustment is a simple and easy process without additional pollution. With the removal of carbon dioxide, the EDI system can produce higher quality ultra-pure water.

In addition, before the ion exchange process, the degassing membrane assembly is used to remove carbon dioxide from water. Carbon dioxide in water imposes an additional burden on ion exchange resins, which require more frequent chemical regeneration. When using membrane contactors instead of chemicals, this can save costs and be environmentally friendly.

DTEC Membrane Contactor (Degassing Membrane) DeCO2 Basic Process (Used in Ultra Pure Water Preparation System):

Note: The traditional process is replaced by degassing film/membrane contactor in dotted line.


ETC456

Specifications of DTEC ETC membrane contactor:


ETC-2.5X8ETC-6X14ETC-6X28ETC-10X28ETC-12X28
Diameters of membrane shell2.5in/63mm6in/150mm6in/150mm10in/250mm12in/315mm
Film Shell MaterialPPUPVCUPVC/PPUPVC/PPUPVC
Component Length305mm780mm1186mm1186mm1186mm
Component weight0.5kg6kg10kg25kg90kg
Membrane area0.4m210m240m288m2176m2
Filament MaterialModified PPModified PPModified PPModified PPModified PP
Membrane filament inner/outer diameter0.22/0.3mm0.22/0.3mm0.22/0.3mm0.22/0.3mm0.22/0.3mm
Processing capacity0.1~0.7m3/h0.2~1.2m3/h1~8m3/h6~16m3/h15~35m3/h
Pressure loss0.01~0.03MPa0.01~0.04MPa0.02~0.05MPa0.02~0.05MPa0.02~0.05MPa
Standard removal rate75~90%75~90%78~95%78~95%78~95%
Series series

≤Level 1

≤Level 1

≤Level 2

≤Level 2

≤Level 2

Carbon dioxide accessibility<1ppm<1ppm<1ppm<1ppm<1ppm
Use pressure

≤0.6MPa

≤0.6MPa

≤0.6MPa

≤0.6MPa

≤0.6MPa

Service temperature5~35℃5~35℃5~35℃5~35℃5~35℃
Using PH5~95~95~95~95~9
Use surface tension

≥65mN/m

≥65mN/m

≥65mN/m

≥65mN/m

≥65mN/m

Matters needing attention:1. The module is only suitable for decarbonization of clean water with COD < 50 ppm and SS < 5 ppm.
2. Even if COD in water is less than 50 ppm, the surface tension may still be less than 65 mN/m, resulting in membrane infiltration. Therefore, the detection of surface tension is necessary before use.
3. The water should not contain oxidizing substances, such as hypochlorite, hydrogen peroxide, etc. ORP < 100 is required, otherwise the life of the membrane will be affected.
4. When used for a long time, the organic and mineral substances in water will cause membrane fouling, which will affect the removal and hydrophobic properties of the membrane. It should be cleaned regularly and restored. Cleaning methods can be referred to the DTEC Membrane Cleaning Guide" and carried out under the guidance of DTEC engineers.


Hot Tags: ETC Membrane (remove CO²) Model ETC2.5x8, China, manufacturers, suppliers, factory, customized, buy, cheap, ETC Membrane Remove CO2 Model ETC2 5X8, Ammonia Removal Membrane Contactor Model ETN16X28, ETN Membrane Remove NH4 NH3 Model ETN 6X14, Membrane Contactor For The Removal Of O2 In Liquid Model ETO6X14, Factory Supply 5 Tons Hour Capacity Membrane O2 Removal System Model ETOS628, ETN Membrane Remove NH4 NH3 Model ETN 10X28

Send Inquiry

whatsapp

Phone

E-mail

Inquiry